Free template · CNC export
Sunburst
“Sunburst” is a parametric slat wall combining radiating star, dome. Open it in the free studio to adjust dimensions, slat spacing, relief depth and tenon-mortise joinery, then export CNC cutting files (DXF, SVG, G-code) and 3D models (STL, OBJ, STEP).
Open in the free studio →Fabrication at the default size
At the studio's default size of 2,400 × 1,120 mm, “Sunburst” is cut into 60 vertical slats of 18 mm, spaced 40 mm centre to centre. The parts, slats plus back panel, nest onto 5 sheets of 1,220 × 2,440 mm, and the studio estimates about 17 h of machining at 1,200 mm/min in 4 mm passes. Resize the wall or change the spacing in the studio and every figure is recomputed.
- Wall size
- 2,400 × 1,120 mm
- Slats
- 60 · vertical
- Spacing (centre to centre)
- 40 mm · 22 mm gap
- Slat thickness
- 18 mm
- Back panel
- 12 mm · tenon and mortise
- Relief depth (peak to trough)
- 113 mm
- Slat depth
- 81–128 mm
- Sheets after nesting
- 5 sheets of 1,220 × 2,440 mm
- Contour length (per pass)
- 188 m
- Machining time (estimate)
- ≈ 17 h
Computed by the studio's slicing and nesting engine for this template's default settings, on 1,220 × 2,440 mm sheets.
Design specifications
- Pattern
- radiating star, dome
- Wave layers
- 2
- Density
- low
- Blend
- additive
- Falloff
- none
Machining notes
The slat outlines stay smooth: 188 m of contour per pass, quick to cut and easy to sand. With 113 mm from peak to trough the relief is shallow, so the slats stay narrow and nest onto 5 sheets. Slat depths range from 81 to 128 mm across the wall, so the blanks differ in width and the engraved labels give the assembly order.
Style
Ripples, rings and radial patterns
Rings, ripples, spirals and rays that grow from one or more centres. A radial design gives the wall a focal point, which works above a fireplace, behind a headboard or at the end of a corridor. Each slat crosses the pattern at a different place, so the profiles change from one slat to the next and the engraved labels guide assembly.
