Free template · CNC export
Quilted
“Quilted” is a parametric slat wall combining diamond lattice, checker pattern. Open it in the free studio to adjust dimensions, slat spacing, relief depth and tenon-mortise joinery, then export CNC cutting files (DXF, SVG, G-code) and 3D models (STL, OBJ, STEP).
Open in the free studio →Fabrication at the default size
At the studio's default size of 2,400 × 1,120 mm, “Quilted” is cut into 60 vertical slats of 18 mm, spaced 40 mm centre to centre. The parts, slats plus back panel, nest onto 6 sheets of 1,220 × 2,440 mm, and the studio estimates about 16 h of machining at 1,200 mm/min in 4 mm passes. Resize the wall or change the spacing in the studio and every figure is recomputed.
- Wall size
- 2,400 × 1,120 mm
- Slats
- 60 · vertical
- Spacing (centre to centre)
- 40 mm · 22 mm gap
- Slat thickness
- 18 mm
- Back panel
- 12 mm · tenon and mortise
- Relief depth (peak to trough)
- 227 mm
- Slat depth
- 113–243 mm
- Sheets after nesting
- 6 sheets of 1,220 × 2,440 mm
- Contour length (per pass)
- 186 m
- Machining time (estimate)
- ≈ 16 h
Computed by the studio's slicing and nesting engine for this template's default settings, on 1,220 × 2,440 mm sheets.
Design specifications
- Pattern
- diamond lattice, checker pattern
- Wave layers
- 2
- Density
- medium
- Blend
- additive
- Falloff
- none
Machining notes
The slat outlines stay smooth: 186 m of contour per pass, quick to cut and easy to sand. With 227 mm from peak to trough the relief is deep, so each slat needs a wide blank and the parts fill 6 sheets. Slat depths range from 113 to 243 mm across the wall, so the blanks differ in width and the engraved labels give the assembly order.
Style
Geometric and op-art
Repeating cells, checkers, diamonds and moiré rings that play with light as much as with depth. Under raking light the facets switch between bright and dark as you walk past, which is the op-art effect. They fit modern interiors, offices and shop fronts, and a dark or painted finish strengthens the contrast.
