Free template · CNC export
Strata
“Strata” is a parametric slat wall combining linear waves, swell waves. Open it in the free studio to adjust dimensions, slat spacing, relief depth and tenon-mortise joinery, then export CNC cutting files (DXF, SVG, G-code) and 3D models (STL, OBJ, STEP).
Open in the free studio →Fabrication at the default size
At the studio's default size of 2,400 × 1,120 mm, “Strata” is cut into 60 vertical slats of 18 mm, spaced 40 mm centre to centre. The parts, slats plus back panel, nest onto 11 sheets of 1,220 × 2,440 mm, and the studio estimates about 18 h of machining at 1,200 mm/min in 4 mm passes. Resize the wall or change the spacing in the studio and every figure is recomputed.
- Wall size
- 2,400 × 1,120 mm
- Slats
- 60 · vertical
- Spacing (centre to centre)
- 40 mm · 22 mm gap
- Slat thickness
- 18 mm
- Back panel
- 12 mm · tenon and mortise
- Relief depth (peak to trough)
- 324 mm
- Slat depth
- 178–339 mm
- Sheets after nesting
- 11 sheets of 1,220 × 2,440 mm
- Contour length (per pass)
- 203 m
- Machining time (estimate)
- ≈ 18 h
Computed by the studio's slicing and nesting engine for this template's default settings, on 1,220 × 2,440 mm sheets.
Design specifications
- Pattern
- linear waves, swell waves
- Wave layers
- 2
- Density
- high
- Blend
- additive
- Falloff
- none
Machining notes
The slat outlines stay smooth: 203 m of contour per pass, quick to cut and easy to sand. With 324 mm from peak to trough the relief is deep, so each slat needs a wide blank and the parts fill 11 sheets. Slat depths range from 178 to 339 mm across the wall, so the blanks differ in width and the engraved labels give the assembly order.
Style
Waves and swell
Crests that roll across the whole wall, from one slow swell to layered folds and fine linear ribs. The movement runs along the room, so these designs suit long walls behind a sofa, a bed or a reception desk. Deep swells need wider slat blanks, so they take more sheets than shallow ribs.
